Product Description:
Arduino is a name for Open-source ready to use hardware platform with Free Software and IDE, for developing quick and easy interactive electronic project or prototype. Arduino and Inventor boards are Arduino compatible low cost and easy to use board developed for hobbyist and professional. Hear you will find many Arduino boards like populer UNO, Leonardo, Mega2560, Pro Micro, Mini and their accessories.
Arduino Mega 2560 R3 (Original - Made in Italy)
The Arduino Mega 2560 is a micro controller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Specifications:
|
Microcontroller
|
ATmega2560
|
|
Operating
Voltage
|
5V
|
|
Input
Voltage(recommended)
|
7-12V
|
|
Digital
I/O Pins
|
54(of
which 14 provide PWM output)
|
|
Analog
Input Pins
|
16
|
|
DC
Current per I/O Pin
|
40Ma
|
|
Flash
Memory
|
256KB
of which 4 KB used by bootloader
|
Description:
The Arduino Mega is a micro controller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.
The Arduino Mega Compatible Board is a micro controller board based on the ATmega2560.It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.
ATmega328 micro controller 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed Automatic reset during program download Power OK blue LED Green (TX), red (RX) and orange (L) LED Auto sensing/switching power input Small mini-B USB for programming and serial monitor ICSP header for direct program download Standard 0.1" spacing DIP (breadboard friendly) Manual reset switch.
Technical Specification
· Clock Speed 16 MHz
· Dimensions 0.73" x 1.70"
· ATmega2560 micro controller
· Input voltage - 7-12V
· 54 Digital I/O Pins (14 PWM outputs)
· 16 Analog Inputs
· 256k Flash Memory
· 16Mhz Clock Speed
· Compatible with Arduino MEGA2560
· Provides excellent protection, with fashion appearance.
· Color: Transparent.
· Material: Acrylic.
The Arduino Mega 2560 is a micro controller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces. The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.
Atmega 16U2 replace the 8U2.
Note: This is 100% GENUINE ARDUINO board made in & imported from ITALY.
Arduino Mega Features:
· Micro controller ATmega2560
· Operating Voltage 5V
· Input Voltage (recommended) 7-12V
· Input Voltage (limits) 6-20V
· Digital I/O Pins 54 (of which 15 provide PWM output)
· Analog Input Pins 16
· DC Current per I/O Pin 40 mA
· DC Current for 3.3V Pin 50 mA
· Flash Memory 256 KB of which 8 KB used by bootloader
· SRAM 8 KB
· EEPROM 4 KB
· Clock Speed 16 MHz
· Resettable polyfuse that protects PC USB ports from shorts and overcurrent
· Arduino Mega Package: 1x Arduino Mega 2560 R3
· 16 Analog Inputs
· 256k Flash Memory
· 16Mhz Clock Speed
· ATmega2560 micro controller
· Input voltage - 7-12V
· 54 Digital I/O Pins (14 PWM outputs)
Arduino Mega Package Resources:
· Getting Started with Arduino Mega 2560
· Go to the Arduino Mega 2560 LABS Page
· Arduino IDE
· ATmega2560 (datasheet)
· Arduino Mega2560 R3 reference design
· Arduino Mega2560 R3 schematic
· Product page
Arduino Mega Dimensions:
· Length 4"
· Width 2.1"
Other Information:
Minimum Order Quantity: 1 Piece
Note: This is Compatible with Arduino Mega 2560.
IMAGE